Usado compressor en Daegu (Taegu), Corea del Sur

Auto Rebar Bending System(KBS-25-5 KBS-25-5A)

Supply table: 0.75kw X 1 (KBS-25-5A) 1.5kw X 1 | Compressor: 3.75kw X 1 | Electric: 220V/380V 3Phase | Bending capacity: D10~D25 | Bending angle: 15˚~ 180˚ | Working speed: 5sec/180˚ 6.3rpm | Supply table speed: ...

Auto Rebar Bending System(KBS-16-5)

Supple table: 0.75kw x 1 | Compressor: 2.25kw ×1 | Electric: 220V / 380V 3Phase | Bending capacity: D10~D16 | Bending angle: 15˚~ 180˚ | Working speed: 4sec/180˚ 9.5rpm | Supply table speed: 7.2m/min | Loading ca...

Semiautomatic Rebar Cutting System(KMC-42AS)

• Fabricante: KMC

Feed conveyor unit: 0.75kw×3 | Compressor: 2.25kw×1 | Electric: 220V / 380V 3Phase | R p m: 27rpm | Feed conveyor speed: 39mm/min | Blade width: 166mm×80×35 | Cutting length (mm): 500 (min) ~ 6,000 (max) | Loadin...

Auto Rebar Bending System(KBS-32-2DS)

Supply table: 1.5kw X 1 | Head transfer: 0.75kw X 2 | Compressor: 2.25kw X 1 | Electric: 380V 3Phase | Bending capacity: D10 ~ D32 | Bending angle: 15˚~ 180˚ | Working speed: 2.8sec/180˚ 10.8rpm | Supply table sp...

Auto Rebar Cutting System(KMC-60AS)

• Fabricante: KMC

Feed conveyor unit: 1.5kw×2 | Supple table: 1.5kw×4 | Compressor: 7.5kw×1 | Electric: 220V / 380V 3Phase | R p m: 27rpm | Feed conveyor speed: 49m/min | Blade dimension: 300mm×100×50 | Cutting length (mm): 600 (m...

Auto Rebar Cutting System(KMC-60DS:Touch Screen Type)

• Fabricante: KMC

Feed conveyor unit: 1.5kw×2 | Supply table unit: 1.5kw×4 | Compressor: 7.5kw×1 | Electric: 220V / 380V 3Phase | R p m: 27rpm | Feed conveyor speed: 49mm/min | Blade dimension: 300mm×100×50 | Cutting length (mm): ...

Auto Rebar Cutting System(KMC-300DS)

• Fabricante: KMC

Feed conveyor unit: 1.5kw×2 | Supply table unit: 1.5kw×2 | Compressor: 7.5kw×1 | Electric: 220V / 380V 3Phase | R p m: 6rpm | Feed conveyor speed: 49m/min | Blade dimendion: 300mm×100×50 | Length of cuttable reba...

Auto Rebar Cutting System(KMC-500DS)

• Fabricante: KMC

Feed conveyor unit: 1.5kw×2 | Supply table unit: 1.5kw×2 | Compressor: 11.2kw×1 | Electric: 220V / 380V 3Phase | R p m: 6rpm | Feed conveyor speed: 49m/min | Blade dimension: Upper : 475mm×110×55 Lower : 495mm×80...

2002 Allison 501-KH5

• Fabricante: Allison

Artículo: Gas-turbine power plant | Rotación: 14,550rpm | Capacidad del generador: 6,230kw | Motor: 230kw | Presión de descarga: 1.86MPa | Quantity of gas-flow: 1,620Nm/h