Usado Barcos A Motor en Nueva Zelanda, Australia

Leonardo Eagle 54

• Fabricante: Leonardo

Length: 16,64 m (54’-5”) | Beam: 3,27 m (10’-8”) | Mast height: 20.30 meters (66’7”) above DWL | Draft: 2.80 meters (9’2”) or 2.20 meters (7’3”) | Displacement: 9.000 Kg (19840 lbs) of which 3.705 Kg ballast (817...

Leonardo Eagle 44

• Fabricante: Leonardo

Length: 13,33 m (43’ 9’’) | Beam: 2,76 m (9’ 1’’) | Mast height: 16.35 meters (52’8”) above DWL | Draft: 1.35 meters (4’5”) or 2.00 meters (6’7”) | Displacement: 5.075 Kg (11190 lbs) of which 1.920 Kg ballast (42...

1995 JF 39

Length: 39 | Beam: 3.75 m | Draft: 1.35 m | Make: JF 39 | Hull material: Mahogany ply strip plank with Biaxial fibreglass and epoxy resin. | Region: Rose Bay, NSW | Vessel name: Dolphin Street | Displacement: 700...

1975 Formosa 41

Length: 41 | Beam: 3.71m | Draft: 1.9m | Displacement: 14T | Designer: William Gardner | Builder: Formosa Boat Building Co | Make: Formosa | Hull material: Fibreglass/GRP | Region: Drummoyne NSW | Vessel name: Ga...

2000 Riviera 3000 Offshore

Length: 28 | Beam: 3.49 m | Draft: 0.88 m | Make: Riviera | Hull material: Fiberglass/ GRP | Region: Double Bay, NSW | Vessel name: Baguette III | Displacement: 5,500 kg | Deck material: Fiberglass / GRP | Hin: A...

1965 Ron Swanson 40′ Timber Yacht

Boat type: 40ft Ron Swanson Timber Yacht | Length: 40 | Beam: 2.90m | Draft: 2.00m | Designer: Ron Swanson | Builder: Ron Swanson | Make: Ron Swanson | Region: Sydney | Vessel name: Syonara | Deck material: Plywo...

2013 Dunning 60

Length: 60 | Beam: 3,96 m | Draft: 4,25 m | Make: Mcconaghy Boats | Hull material: Built in carbon with core cell foam core and epoxy resin infused | Region: Sydney, NSW | Vessel name: The Red Hand | Displacement...

1942 AG Williams Cruiser

Length: 26 | Beam: 2.8 m | Draft: 0.8 m | Make: Picnic Boat from AG Williams | Hull material: Planked Oregon Timber | Region: Bobbins Head, NSW | Vessel name: Gull | Displacement: 25000 kg | Engine: Volvo 40HP | ...

CNB CNB 78

• Fabricante: CNB

Arquitecto naval: Philippe Briand | Longitud total: 23.17 m | Borrador: 3.50 m | manga máxima: 6.10 m | Desplazamiento (ligero): 45,000 kg

McConaghy MC 62

• Fabricante: McConaghy

Longitud: 18.9 m | manga máxima: 8.82 m | Motores: 2 x 57 HP | Capacidad de combustible: 600 L | Capacidad de agua: 600 L | Arquitecto naval: Ker Yacht Design | Diseñador de interiores: Design Unlimited

2010 Beneteau 57

• Fabricante: Beneteau
• Modelo: 57

Length: 57 | Beam: 4.98 m | Draft: 1.85 m - 2.40 m | Make: Beneteau | Hull material: Fibreglass | Region: Sydney, NSW | Vessel name: The Count | Displacement: 18,780 kg | Deck material: Fibreglass and laid Teak. ...

1977 6 Metre Modern

Length: 33 | Beam: 1.80 m | Draft: 1.70 m | Hull material: GRP | Region: Lane Cove River | Vessel name: May Be XI | Deck material: GRP | Keel / balast: Lead | Designer: Peter Norlin | Hin: AUWWA177028AD3 | Builde...

1982 Lotus 10.6

Length: 33 | Bram: 3.52 m | Draft: 1.57 m | Hull material: GRP | Region: Sydney, NSW | Vessel name: Lotus | Beam: 3.52 m | Deck material: One piece GRP deck and cabin moulding bolted through aluminium toe rails. ...

1990 Riva Corsaro 20

• Fabricante: Riva Europe

Length: 65.6 | Beam: 5.35 m | Draft: 1.65 m | Displacement: 25000 kg | Builder: Riva (now part of Ferretti Group) | Make: Riva | Hull material: Fibreglass/GRP | Region: Pittwater, NSW | Vessel name: Volare | Deck...

2018 Beneteau 51.1

• Fabricante: Beneteau
• Modelo: 511

Length: 51.1 | Beam: 4.80 m | Draft: 2.36 m | Make: Beneteau Oceanis | Hull material: GRP | Region: CYCA, NSW | Vessel name: Wilde Rush | Displacement: 14,000 kg | Keel / balast: Deep T shaped keel | Designer: Be...