Usado Barcos A Motor en Nueva Zelanda, Australia

1997 Santa Cruz 72

Loa: 22.05m | Lwl: 18.97m | Beam: 4.9m | Draft: 3.4m | Make: Santa Cruz | Hull material: Carbon composite | Length: 72 | Region: Sydney, Australia | Vessel name: Antipodes | Deck material: Carbon composite | Keel...

1964 61ft Classic Racer/Cruiser ‘Fidelis’

Length: 61 | Beam: 2.96 m | Draft: 2.55 m | Hull material: Triple laminated Kauri with structural GRP sheathing. | Region: Sydney, NSW | Vessel name: Fidelis | Displacement: 15,000 kg | Deck material: The base pl...

2004 Dubois 90

Length: 90 | Beam: 4.44 m | Draft: 5.01 m | Make: Dubois 90 | Region: Sydney, NSW | Vessel name: Genuine Risk | Displacement: 21410 kg | Designer: Ed Dubois | Hin: AUWWA198703MG7 | Builder: McConaghy | Registrati...

2013 Oyster 575

Length: 58.8 | Beam: 5.00 m | Draft: 2.06 m | Region: Sydney | Vessel name: Margot | Displacement: 28,000 kg | Deck material: Moulded in GRP with balsa core | Keel / balast: High performance bulb (HPB) external l...

1939 30 Square Built – ‘Typhoon’

Length: 13.50 | Beam: 2.10m | Draft: 1.90m | Displacement: 3,200kg | Builder: Les Steel, Port Macquarie NSW | Make: 30 Square Built | Hull material: Oregon on Spotted Gum ribs, Copper fastened. Sanded and re-spl...

Leonardo Eagle 38

• Fabricante: Leonardo

Length: 11.80 m | Beam: 2.60 m | Mast height: 13.80 meters above DWL | Draft: 1.25 m | Displacement: 3.800 kg of which 1.350 kg ballast | Sail area: 59,8 m2 | Ce category: C (shore- and coastal waters) | Design: ...

Leonardo Eagle 54

• Fabricante: Leonardo

Length: 16,64 m (54’-5”) | Beam: 3,27 m (10’-8”) | Mast height: 20.30 meters (66’7”) above DWL | Draft: 2.80 meters (9’2”) or 2.20 meters (7’3”) | Displacement: 9.000 Kg (19840 lbs) of which 3.705 Kg ballast (817...

Leonardo Eagle 44

• Fabricante: Leonardo

Length: 13,33 m (43’ 9’’) | Beam: 2,76 m (9’ 1’’) | Mast height: 16.35 meters (52’8”) above DWL | Draft: 1.35 meters (4’5”) or 2.00 meters (6’7”) | Displacement: 5.075 Kg (11190 lbs) of which 1.920 Kg ballast (42...

1995 JF 39

Length: 39 | Beam: 3.75 m | Draft: 1.35 m | Make: JF 39 | Hull material: Mahogany ply strip plank with Biaxial fibreglass and epoxy resin. | Region: Rose Bay, NSW | Vessel name: Dolphin Street | Displacement: 700...

1975 Formosa 41

Length: 41 | Beam: 3.71m | Draft: 1.9m | Displacement: 14T | Designer: William Gardner | Builder: Formosa Boat Building Co | Make: Formosa | Hull material: Fibreglass/GRP | Region: Drummoyne NSW | Vessel name: Ga...

2000 Riviera 3000 Offshore

Length: 28 | Beam: 3.49 m | Draft: 0.88 m | Make: Riviera | Hull material: Fiberglass/ GRP | Region: Double Bay, NSW | Vessel name: Baguette III | Displacement: 5,500 kg | Deck material: Fiberglass / GRP | Hin: A...

1965 Ron Swanson 40′ Timber Yacht

Boat type: 40ft Ron Swanson Timber Yacht | Length: 40 | Beam: 2.90m | Draft: 2.00m | Designer: Ron Swanson | Builder: Ron Swanson | Make: Ron Swanson | Region: Sydney | Vessel name: Syonara | Deck material: Plywo...

2013 Dunning 60

Length: 60 | Beam: 3,96 m | Draft: 4,25 m | Make: Mcconaghy Boats | Hull material: Built in carbon with core cell foam core and epoxy resin infused | Region: Sydney, NSW | Vessel name: The Red Hand | Displacement...

2011 Princess 85 Motor Yacht

• Fabricante: Princess

1999 Warren 82 Motor Yacht

• Fabricante: Warren