Nuevo Sensores en Nagano, Japón

AC/DC CURRENT SENSOR CT7822

rated measurement current: 20 A AC/DC | Max. allowable input: 30 A rms continuous (±43 Ap) | Bandwidth: DC to 100 kHz | Basic accuracy: DC± 0.3％ rdg. ±0.1％ f.s. | Core diameter: φ 5 mm or less | Output connector...

AC/DC CURRENT SENSOR CT7812

Rated measurement current: 2 A AC/DC | Max. allowable input: 3 A rms continuous (±4.3 Ap) | Bandwidth: DC to 100 kHz | Basic accuracy: DC± 0.3％ rdg. ±0.1％ f.s. | Core diameter: φ 5 mm or less | Output connectors:...

CLAMP ON SENSOR 9661-01

HIGH VOLTAGE MULTIPLEXER SW2001

Input channels: 2 channels of high-voltage, 2-terminal input: insulation and withstanding voltage tester input, impulse winding tester input 2 channels of low-voltage, 4-terminal input: LCR meter input, resistan...

CLAMP ON SENSOR 9669

Rated measurement current: 1000 A AC | Max. measurement current: Continuous 1000 A (45 to 66 Hz) | Output rate: 0.5 mV AC/ A | Amplitude accuracy (45 to 66 hz): ±1.0% rdg. ±0.01% f.s. | Phase accuracy: ±1° (45 ...

CLAMP ON SENSOR 9660

Rated measurement current: 100 A AC | Max. measurement current: Continuous 130 A (45 to 66 Hz) | Output rate: 1 mV AC/ A | Amplitude accuracy (45 to 66 hz): ±0.3 % rdg. ±0.02 % f.s. | Phase accuracy: ±1° (45 Hz...

CLAMP ON LEAK SENSOR 9675

Rated primary current: AC 10 A (for leak current measurement, 50/60 Hz) | Max. allowable input (45-66 hz): Max. 10 A of continuous input | Rated output current: AC 100 mV/A | Amplitude accuracy (45-66 hz): ±1.0...

CLAMP ON SENSOR 9695-03

Rated measurement current: 100 A AC | Max. measurement current: Continuous 130 A (45 to 66 Hz) | Output rate: 1 mV AC/ A | Amplitude accuracy (45 to 66 hz): ±0.3 % rdg. ±0.02 % f.s. (*1) | Phase accuracy: ±1° (...

AC/DC CURRENT SENSOR CT7642

Rated measurement current: 2000 A AC/DC | Max. measurement current: 2000 A (requires derating at frequency)) | Max. allowable peak input: 2840 A peak | Bandwidth: DC to 10 kHz (-3dB) (When used in combination wi...

AC/DC CURRENT SENSOR CT7631

Rated measurement current: 100 A AC/DC | Max. measurement current: 100 A (requires derating at frequency)) | Max. allowable peak input: 150 A peak | Bandwidth: DC to 10 kHz (-3dB) (When used in combination with ...

CLAMP ON SENSOR 9272-05

Rated current: 20 A AC, or 200 A AC (selectable) | Max. allowable input: 50 A rms (at 20 A range), 300 A rms (at 200 A range) | Frequency characteristics: 1 Hz (±2 % rdg. ±0.1 % f.s.) to 100 kHz (±30 % rdg. ±0.1 ...

AC FLEXIBLE CURRENT SENSOR CT7040 series

Rated measurement current: 6000 A AC | Internal measurement range: 600A AC/ 6000A AC (Range is controlled by main device) | Max. allowable input: 10000 A continuous (at 6000 A range, 45 to 66 Hz, requires deratin...

NON-CONTACT CAN SENSOR SP7001, SP7002

Detection method: Capacitive-coupled signal detection No bare-wire connections | Detectable cables: AVS/AVSS-compliant cables, External diameter: 1.2 mm (0.05 in) to 2.0 mm (0.08 in) | Number of channels: 1 CH (S...

AC/DC AUTO-ZERO CURRENT SENSOR CT7742

Rated measurement current: 2000 A AC/DC | Max. measurement current: 2000 A (requires derating at frequency) | Max. allowable peak input: 2840 A peak | Bandwidth: DC to 5 kHz (-3dB) (When used in combination with...

AC/DC AUTO-ZERO CURRENT SENSOR CT7736

Rated measurement current: 600 A AC/DC | Max. measurement current: 600 A (requires derating at frequency) | Max. allowable peak input: 900 A peak | Bandwidth: DC to 5 kHz (-3dB) (When used in combination with CM...