Building Filters

Usado Automatización Industrial en Nagano, Japón

CLAMP ON SENSOR 9694
Rated measurement current: 5 A AC | Max. measurement current: Continuous 50 A (45 to 66 Hz) | Output rate: 10 mV AC/ A | Amplitude accuracy (45 to 66 hz): ±0.3 % rdg. ±0.02 % f.s. | Phase accuracy: ±2° (45 Hz t...
Nagano, Japón
AC/DC CURRENT SENSOR CT6862-05
Rated current: 50 A AC/DC | Max. allowable input: Within the derating range, up to ±150 A peak (design value) allowed at 40°C or less for 20 ms or less | Frequency bandwidth: Amplitude: DC to 10 MHz Phase: DC to ...
Nagano, Japón
SAFETY TEST DATA MANAGEMENT SOFTWARE 9267
Compatible models: ST5520*, ST5540/ST5541, 3153, 3154, 3156, 3157, 3158, 3159, 3174, 3332, 3333, 3334, and PLCs from various manufacturers (for connection switching) *Control of the ST5520 is subject to certain l...
Nagano, Japón
LEAK CURRENT HiTESTER ST5541
Measurement methods: Measurement of voltage drop across body simulated resistance points, Calculation and display of current values, True rms measurement, Measurement unit floats relative to instrument ground. ...
Nagano, Japón
FlexPro
Productos hioki compatibles: MR6000, MR6000-01, MR8827, MR8740, MR8741, MR8847 (MR8847-01, MR8847-02, MR8847-03), MR8847A (MR8847-51, MR8847-52, MR8847-53), MR8875, LR8450, LR8432, LR8431, LR8410, LR8400, 8423, e...
Nagano, Japón
LAN COMMUNICATOR 9333
Supported units: - Model MR8847-51/-52/-53, MR8827 (Ver.1.00 or later) - Model MR8740 (Ver.3.12 or later), MR8741 (Ver.2.12 or later), MR8847-01/-02/-03, 8847 (Ver.3.07 or later), 8826 (Ver.2.30 or later) - Model...
Nagano, Japón
AC/DC AUTO-ZERO CURRENT SENSOR CT7742
Rated measurement current: 2000 A AC/DC | Max. measurement current: 2000 A (requires derating at frequency) | Max. allowable peak input: 2840 A peak | Bandwidth: DC to 5 kHz (-3dB) (When used in combination with...
Nagano, Japón
AC/DC CURRENT SENSOR CT7642
Rated measurement current: 2000 A AC/DC | Max. measurement current: 2000 A (requires derating at frequency)) | Max. allowable peak input: 2840 A peak | Bandwidth: DC to 10 kHz (-3dB) (When used in combination wi...
Nagano, Japón
AC/DC CURRENT SENSOR CT7631
Rated measurement current: 100 A AC/DC | Max. measurement current: 100 A (requires derating at frequency)) | Max. allowable peak input: 150 A peak | Bandwidth: DC to 10 kHz (-3dB) (When used in combination with ...
Nagano, Japón
AC/DC AUTO-ZERO CURRENT SENSOR CT7736
Rated measurement current: 600 A AC/DC | Max. measurement current: 600 A (requires derating at frequency) | Max. allowable peak input: 900 A peak | Bandwidth: DC to 5 kHz (-3dB) (When used in combination with CM...
Nagano, Japón
DISPLAY UNIT CM7290
Sensor: CT7642, 7742 | Measurement parameters: DC, AC, DC+AC, Hz | Crest factor: 3 at 5000 count or 2.5 at 6000 count for AC and DC+AC | Output method: WAVE, RMS, PEAK, FREQ | Input connectors: HIOKI PL 14 | Outp...
Nagano, Japón
AC FLEXIBLE CURRENT SENSOR CT7040 series
Rated measurement current: 6000 A AC | Internal measurement range: 600A AC/ 6000A AC (Range is controlled by main device) | Max. allowable input: 10000 A continuous (at 6000 A range, 45 to 66 Hz, requires deratin...
Nagano, Japón
CLAMP ON LEAK SENSOR 9675
Rated primary current: AC 10 A (for leak current measurement, 50/60 Hz) | Max. allowable input (45-66 hz): Max. 10 A of continuous input | Rated output current: AC 100 mV/A | Amplitude accuracy (45-66 hz): ±1.0...
Nagano, Japón
CLAMP ON SENSOR 9695-03
Rated measurement current: 100 A AC | Max. measurement current: Continuous 130 A (45 to 66 Hz) | Output rate: 1 mV AC/ A | Amplitude accuracy (45 to 66 hz): ±0.3 % rdg. ±0.02 % f.s. (*1) | Phase accuracy: ±1° (...
Nagano, Japón
CLAMP ON SENSOR 9669
Rated measurement current: 1000 A AC | Max. measurement current: Continuous 1000 A (45 to 66 Hz) | Output rate: 0.5 mV AC/ A | Amplitude accuracy (45 to 66 hz): ±1.0% rdg. ±0.01% f.s. | Phase accuracy: ±1° (45 ...
Nagano, Japón